Workcell

Your first measured project

Open a small native project. Inspect it, run it and keep the measured result.

1. Install for your platform

Choose your exact operating system and CPU on Downloads, verify its checksum and follow the linked installation guide. Local engineering needs no account. On Windows, let the app complete its protected-engine setup; never disable isolation.

2. Open the starter

Download the [measured slide project](/examples/measured-slide.zip). Extract the whole folder into a writable local directory, then use File → Open project to open project.cnoid. Keep mechanism.body, live-controller.py and engineering/setups/live.json together. Its original internal title is “Chat UI Catalog”; this is an engineering fixture, not an AI-generated result.

3. Inspect before running

In Items, select SharedMechanism and inspect its slide joint. The controller uses measured position and velocity, a 60 mm target and bounded ±20 N effort. Read live-controller.py first. This example deliberately slows each control step so live frames are visible; it is not a speed benchmark.

4. Run, then read

Choose the saved live setup and Run: one second, a 0.002 s simulation step and 0.02 s recording interval. Wait for completion. Inspect measured position with its units, time samples and exact run/source identity. The retained Windows example has 50 frames and ends near 60 mm. Your own run, not a web animation, determines your result. Inspect the retained example.

5. Replay and make it yours

Choose Play to replay the retained run without starting physics again. Save a copy before editing. Make one small geometry or controller change, save and reopen the project, then run again and compare measured outputs. Candidate changes use Review → Apply; review alone does not change your saved project. Review and recovery.

If something fails

Stop the run, keep the exact error and verify the saved source and available disk space. Do not weaken isolation or repeatedly resubmit AI tasks. Troubleshooting explains what to share with support. Simulation is not physical robot operation or safety certification.

All guides · Support